![]() Thank you all so much for all the hits on my last major video. txt setting files and can’t find anything. This video was created to help with all the questions that I have been getting. I use K40 Whisperer as my cutting program, I have gone through the entire settings and can’t find a way to move the “home” in the machine. You just need to find one that your CAD program can output. Inkscape can read multiple input file types. Laser Draw (LaserDRW) - Inkscape Extension. To bring vectors into LaserDRW you can use the LaserDRW Inkscape extension. This isn’t too big a deal except I frequently forget to jog the head over to the proper orgin as I run separate passes for separate layers/settings and wind up often ruining the piece when things are index off different “home” positions. Re: Importing a CAD file with LaserDRW and K40 Laser. (see photo where i have a 3/4" foamboard as a spacer as index for cutting closer to the edge to save on material). Same goes for the left-right (X), it looks like the head can go farther left another 3/4" judging by the rail. ![]() ![]() The duct protrudes into the “cut bed” by about 1/4" so I would have to manually jog the head down (Y) before beginning to cut. (see photo where the laser cut that line). Laser Draw (LaserDRW) - Inkscape Extension Inkscape can read multiple input file types. ![]() That is, the distance from the head that the object must be set to. Look for the thinnest portion of the line. Etch a line (s) down the length of the material. I just started using this machine, i noticed that the default “home” (when set to upper left), the vent duct is inside the cutting perimeter. To bring vectors into LaserDRW you can use the LaserDRW Inkscape extension. Lay material on the bed with one end propped up so that it is sitting at an angle to the cutting head. I too have extensive experience with graphics programs, laser cutting, etc. Bought this generic K40 cutter/engraver used, was all set up and ready to go from previous owner who was a engineer and pretty knowledgeable. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |